How-To | Installation Tips > Extending Your Outdoor String Lights

🆘EXTENDING OUTDOOR STRING LIGHTS

Applies to Select Nanoleaf Outdoor String Lights Smarter Kits and Expansion Packs

Before You Start

⚠️ Unplug the Lights from Power | Safety first!

• Before adding an extension, make sure your lights are completely unplugged from the power outlet. This will help prevent any electrical issues or damage during setup.

ℹ️Nanoleaf Outdoor String Lights can be extended up to 45m (147ft). Smarter Kits are available in 15, 30, or 45m 
(49, 98, or 147ft) and Expansion Packs are available in 15m (49ft).

Once you do that, follow this guide to seamlessly add an extension to your existing setup:

Step 1 - Unbox and Connect the Extension

• Carefully unbox your 15 metre (49 ft) extension string light.

• Connect the extension to the end of your current string light setup.

• Make sure the connector is firmly tightened and fully secured.

— — —

Step 2 - Plug the Lights Back into Power

• Once the extension is connected, plug the entire string light setup back into the power outlet.

— — —

Step 3 - Verify Full Illumination

• Check the full length of the string lights, including the new extension, to ensure all sections are lit.

• Use the controller buttons to test various colors or scenes and confirm everything is responding correctly.

⚠️ If part of the light string is not turning on, unplug and double-check the connection point between the main lights 
and the extension.

— — —

Step 4 - Install the Extension in Your Space

• Now that the lights are working, you can install the extension wherever you like.
• Follow the installation instructions from your user guide (linked below) to ensure the lights are secured properly.

📖: Resource | Product User Guide > Outdoor Essentials

— — —

Need some help?

🆘 Submit a ticket using the form: Hardware Support