How-To | Installation Tips > Extending Your Permanent Outdoor Lights

🆘EXTENDING PERMANENT OUTDOOR LIGHTS

Applies to Select Nanoleaf Permanent Outdoor Lights Smarter Kits and Expansion Packs

Before You Start

⚠️ Unplug the Lights from Power | Safety first!

• Before adding an extension, make sure your lights are completely unplugged from the power outlet. This will help prevent any electrical issues or damage during setup.

ℹ️ Nanoleaf Permanent Outdoor Lights can be extended up to 45 metres (147 feet) using 5 metre (16.4 ft) 
extension packs. 

Once you do that, follow this guide to seamlessly add an extension to your existing setup:

Step 1 - Unbox and Connect the Extension

• Carefully unbox your 5 metre (16.4 ft) extension light set.

• Connect the extension to the end of your current light setup.

• Make sure the connector is firmly and securely attached. It should feel tight and stable.

— — —

Step 2 - Plug the Lights Back into Power

• Once everything is connected properly, go ahead and plug the lights back in to the power outlet.

— — —

Step 3 - Verify Full Illumination

• Check the entire light string, including the new extension, to ensure all sections are lit.

• Use the controller buttons to test different effects or colors.

⚠️ If part of the light string is not turning on, unplug and double-check the connection point between the main lights 
and the extension.

— — —

Step 4 - Install the Extension in Your Space

• Now that the lights are working, you can install the extension wherever you like.
• Follow the installation instructions from your user guide (linked below) to ensure the lights are secured properly.

💡 Pro Tip | Plan the full layout before mounting... it will make things much easier!

💚 Your lights are now extended and ready to shine! By following the steps above, your Nanoleaf Permanent Outdoor Lights should now include your new extension and be glowing beautifully in your space.

— — —

🎥 Want to see it done? Watch our installation video here.

📖 Permanent Outdoor Lights User Manual

— — —

Need some help?

🆘 Submit a ticket using the form: Hardware Support